Quicklink Fittings
Quicklink fittings for high pressure plastic hoses Ø 6mm. Plugging in – instead of screwing in – saves time. These fittings are especially useful in cramped situations where one cannot use a tool wrench. More safety and time-saving instead of leaky sites caused by faulty installations. The Quicklink fittings can take up to 210 bar. Recommended accessories are especially robust and wear-resistant high pressure plastic hoses that come pre- filled with grease. This makes the installation even easier and faster. Hoses can also be purchased without grease. |
 |
 |
 |
|||
Male 90° fitting rotatable |
Male fitting straight |
Male 90° fitting rotatable |
||||
| Hose Ø 6 mm |
M 6 x 1 M 8 x 1 M 10 x 1 |
Hose Ø 6 mm |
M 6 x 1 M 8 x 1 M 10 x 1 |
Hose Ø 6 mm |
M 6 x 1 M 8 x 1 M 10 x 1 |
|
| G 1/8 G 1/4 |
G 1/8 G 1/4 |
G 1/8 G 1/4 |
||||
 |
 |
 |
||||
Valve body w/
check valve Connects to progressive distributor |
Tee fitting for high pressure plastic hose |
Tube splicer union for high pressure plastic hose |
||||
| Hose Ø 6 mm |
M 10 x 1 | Hose Ø 6 x 1.5 mm | Hose Ø 6 x 1.5 mm | |||
 |
 |
 |
||||
High pressure plastic hoses Ø 6 x 1.5 mm without grease |
Pipe clip
Ø 6 x 6 mm |
|||||
| Bursting pressure at 20°C about 210 bar. Min. bend radius 50 mm |
Bursting pressure at 20°C about 210 bar. Min. bend radius 50 mm. |
|||||